DJI 9453F Low-Noise Propellers (1 Pair) for Mavic 3 / 3 Pro / Classic / Cine / Enterprise

Original DJI 9453F Low-Noise Propellers are a matched pair of folding blades (1× CW + 1× CCW) designed for the DJI Mavic 3 series. They restore factory performance, make the drone noticeably quieter and can extend flight time by up to 2 minutes thanks to optimized aerodynamics.

Each blade is made from reinforced PA6.6 nylon with 30% glass fiber and finished with high-visibility orange, rubberized tips that dampen edge vortices and help reduce high-frequency prop noise. The quick-release bayonet hub lets you swap propellers in seconds in the field - press, twist and you’re ready to fly again. Every propeller is dynamically balanced at the factory and works seamlessly with DJI’s Smart ESC, keeping vibrations low and your footage stable.

Key features:
Genuine DJI 9453F Low-Noise propellers, 1 pair (2 blades).
Quieter flight - noise reduced by around 2 dB for more discreet operations.
Optimized 9.4 × 5.3 in (23.9 × 13.5 cm) airfoil for efficient lift and up to +2 minutes of flight time.
Reinforced composite: PA6.6 with 30% glass fiber for strength at high RPM.
Soft orange tips improve visibility and help absorb minor impacts.
Quick-release bayonet mount (press & twist) - no tools needed.
Factory dynamic balancing for smoother footage and less stress on motors.
Fully recognized by Smart ESC for safe, stable flight behaviour.
Propeller size (diameter × pitch): 9.4 × 5.3 in (23.9 × 13.5 cm)
Weight per blade: 8.5 g.
Material: PA6.6 nylon + 30% glass fiber, rubberized TPU tips.
Mount: DJI quick-release bayonet (CW / CCW).

Fully compatible with:
DJI Mavic 3
DJI Mavic 3 Cine
DJI Mavic 3 Classic
DJI Mavic 3 Pro
DJI Mavic 3 Pro Cine

Physical fit for:
DJI Mavic 3 Enterprise (M3E)
DJI Mavic 3 Thermal (M3T)
DJI Mavic 3 Multispectral (M3M)

For Enterprise models, use only a complete set of 4 identical 9453F blades and do not mix them with Enterprise-specific propellers - mixing different blade types can cause imbalance and reduce noise-reduction performance. DJI recommends dedicated 9453F Enterprise propellers for optimal results.

Not compatible with: DJI Air, Mini, Phantom, Inspire, or other series due to different hub and blade length.

Replace propellers every ~200 take-off/landing cycles or at the first signs of chips, cracks or deformation.

Always replace blades in pairs and check that each hub is fully locked before flight.

For Enterprise drones, install four identical blades and avoid mixing with other prop models.

After installing new propellers, perform a short hover test and check for abnormal vibrations or noise.

Package contents
1 × CW propeller (9453F Low-Noise)
1 × CCW propeller (9453F Low-Noise)
User leaflet / QC card